0673 Pressure plates for Sandwhich Elements
When invisibly fixing sandwich panels, pressure plates are used to ensure better distribution of wind forces. This will, in the long run, prevent deformation around the fixing points.
Product Information
In the invisible fastening of sandwich panels, pressure plates are utilized to ensure a better distribution of wind forces. This strategy prevents long-term distortions around the attachment points, enhancing structural integrity. The pressure plates not only provide additional stability but also deliver a seamless and aesthetically pleasing finish to the facade. For expert advice on the use of pressure plates in your project, our specialists are ready. Contact us for personalized guidance and discover how this approach can optimize the durability and appearance of your facade construction.
Available Variants (15)
| A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | F (mm) | Material |
|---|---|---|---|---|---|---|
| 25 | 75 | 9 | 12.5 | 50 | 19 | Stainless steel A2 |
| 22 | 80 | 7 | 27 | 26 | 9 | Stainless steel A2 |
| 22 | 80 | 7 | 13 | 27 | 9 | Stainless steel A2 |
| 22 | 50 | 7 | 25 | 9 | Stainless steel A2 | |
| 22 | 140 | 7 | 13 | 27 | 9 | Stainless steel A2 |
| 20 | 150 | 9 | 25 | 25 | 10 | Stainless steel A2 |
| 31 | 120 | 9 | 25 | 35 | 18 | Stainless steel A2 |
| 30 | 200 | 9 | 40 | 40 | 18 | Stainless steel A2 |
| 19 | 160 | 5 | 20 | 40 | 8 | Stainless steel A2 |
| 30 | 75 | 8.5 | 37.5 | 9 | Stainless steel A2 | |
| 30 | 75 | 8.5 | 12.5 | 25 | 20 | Stainless steel A2 |
| 14 | 75 | 15 | Stainless steel A2 | |||
| 19 | 80 | 5 | Stainless steel A2 | |||
| 30 | 75 | 8.5 | 25 | 25 | 19.25 | Gehard staal C1022 |
| 30 | 75 | 8.5 | 25 | 25 | 19.25 | Stainless steel A2 |
Your customised fixing solution within 3 minutes
Discover the facade solution that meets your requirements together with an expert.