0636 Pressure plates for Sandwhich Elements
When invisibly fixing sandwich panels, pressure plates are used to ensure better distribution of wind forces. This will, in the long run, prevent deformation around the fixing points.
Product Information
When discreetly securing sandwich panels, the use of pressure plates plays a crucial role in evenly distributing wind forces. This strategy aims to prevent long-term deformation around the attachment points. By integrating pressure plates, effective protection is provided against potential structural damage that may occur due to uneven forces on the panels. For advice on the proper application of this method in your specific situation, our experts are ready to guide you. Contact us for personalized advice and a careful analysis of your project requirements.
Available Variants (7)
| A (mm) | B (mm) | C (mm) | D (mm) | E (mm) | F (mm) | Material |
|---|---|---|---|---|---|---|
| 45 | 200 | 8 | 80 | 40 | 10.5 | Stainless steel A2 |
| 36 | 200 | 7 | 70 | 20 | 10 | Stainless steel A2 |
| 19 | 100 | 5 | 30 | 20 | 10 | Stainless steel A2 |
| 36 | 180 | 7 | 70 | 20 | 10 | Stainless steel A2 |
| 50 | 200 | 8 | 80 | 20 | 10 | Stainless steel A2 |
| 30.5 | 200 | 8 | 40 | 40 | 14.5 | Stainless steel A2 |
| 50 | 200 | 8 | 80 | 20 | 10 | Gehard staal C1022 |
Your customised fixing solution within 3 minutes
Discover the facade solution that meets your requirements together with an expert.